Hans Campbell is back in the shop, and his Amiga PSU Recap Guide sets the tone for the evening. He begins with a Amiga 2000 power supply that will soon return to his Halloween-themed system. This machine sees daily use, so the recap matters. From the start, he explains what he plans to replace and why.
First, he walks through the parts that actually need attention. Only six capacitors qualify, and the larger computer-grade units still test well. Because of that, he leaves them where they are. Next, he moves to the camera and begins the removal work. He keeps the pace steady since many viewers enjoy seeing the full process instead of a rushed montage.
During the teardown, he runs into a few common issues. For instance, bent leads from older repairs slow things down. He explains why straight leads help future work and keep parts seated properly. As a result, the Amiga PSU Recap Guide becomes a practical demonstration of good bench habits.
Soon after, he encounters factory glue under one of the capacitors. It resists movement, but he works through it with patience. He also deals with tight spacing around coils, which calls for careful hand placement. Through each moment, he talks about his choices and keeps the viewer involved.
Once the old parts are gone, he prepares the board for the new components. He clears the solder, adds fresh joints, and verifies each hole. Then he installs the new capacitors. He checks polarity, keeps the joints clean, and trims each lead with intent. Because of that careful approach, the board starts to look renewed.
Finally, he cleans the entire area and inspects each connection. Everything lines up well. The power supply is now ready for reassembly and a new fan. Before closing, he previews part two, where the unit goes back into the case. Fans of hands-on retro repair will enjoy the close-up view from start to finish, and the Amiga PSU Recap Guide gives them plenty to follow along with.
