Repairing C64 Case Clips with 3D Printed Replacements

196

In the latest episode of More Fun Fixing It, Lee demonstrates a C64 case clip repair using custom 3D printed parts. This practical tutorial walks viewers through replacing broken case clips on a classic Commodore 64. The process uses PETG plastic, epoxy glue, and careful alignment for a long-lasting result.

From the beginning, Lee explains how fragile these original clips can be. Only one remains intact on this specific case, and even that one is cracked. He removes the broken clips using flush cutters and a file. Then, he flattens the mounting area to ensure proper glue adhesion.

Next, Lee prepares the surface. He scratches it with a knife and cleans it with isopropyl alcohol. This step improves the epoxy bond significantly. His 3D printed clips, available on his Discord, are stronger and thinner than earlier versions. These custom clips fit the case slots without binding.

After prepping, Lee mixes five-minute epoxy. He applies glue carefully, avoiding the edges to reduce squeeze-out. Then, he clamps the clips firmly in place. Painter’s tape protects the case finish while the epoxy cures.

Twenty-four hours later, Lee checks the result. The clips hold securely. There’s minimal movement, and the fit feels solid. As a bonus, the clamps left no marks, thanks to the protective tape.

Finally, Lee test-fits the top case. Everything locks in nicely. The clips grip well—even better once the motherboard is back inside. He reassembles the unit and ships it back to its owner, who still needs to give it a good cleaning.

This step-by-step C64 case clip repair video offers a reliable method for fixing vintage breadbin cases. Lee shares his 3D files, tips, and the exact materials he uses. For C64 fans and restoration hobbyists, this episode delivers useful techniques with satisfying results.

Subscribe
Notify of
0 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments